connectors specifications and drawings are subject to alteration without prior notice - dimensions in millimeter card connectors smartmedia - ssfdc specifcations insulation resistance: 1,000m min. at 500v dc withstanding voltage: 500v ac rms for 1 minute contact resistance: 40m max. (initial resistance) excluding conductor resistance of terminal (25m ) voltage rating: 250v ac current rating: 0.5a operating temp. range: C20 c to +60 c materials and finish contact: pb / ni-au insulator base: pps features ? realizing smooth extraction of smartmedia by ejection function ? stand-off types are available to mount components under the body of cn015 ? adapting sequential method to secure data protection by contacting in the order of ground-power-signal correctly series cn015 - type 20 direct mounting, screw fixing (with ejector) cn015 *z - 20 0 1 - * series no. applications: rz = 3.3v for smartmedia card (3.3v) pz = 3.3 v / 5v for smartmedia card (3.3v) and (5v) type 20 pcb mounting: 1 = screw lock type (screw ? 2.2mm see note 1) height of stand-off: ***) 0 = a(0.00mm), b(4.80mm), c(2.80mm) 1 = a(2.00mm), b(6.80mm), c(4.80mm) part number (details) 4- ? 2.20 (screw lock) pcb mounting: type 1 (screw lock) = ? 2.20 type 20 with screw lock ***) dimensions a, b and c are shown in drawings below. recommended pcb layout top view special notice for operation: never soak and wash after soldering. there are cases where smartmedia can not be smoothly inserted because of fux remaining inside of the connector, after washing. wash only part of the connector terminal on pc board. note 1: recommended screw - m2.0 x length (thickness of pc board thickness of fange +2.0mm) function table part number voltage of smartmedia ejector mis-insertion protection sequential contact write protection switch cn015rz-2001-0 cn015rz-2001-1 3.3v yes yes yes yes CN015PZ-2001-0 cn015pz-2001-1 3.3v / 5v yes no yes yes
card connectors connectors specifications and drawings are subject to alteration without prior notice - dimensions in millimeter part number voltage of smartmedia ejector mis-insertion protection sequential contact write protection switch cn015rz-2003-0 3.3v yes yes yes yes cn015 rz - 20 0 3 - 0 specifcations insulation resistance: 1,000m min. at 500v dc withstanding voltage: 500v ac rms for 1 minute contact resistance: 40m max. (initial resistance) excluding conductor resistance of terminal (25m ) voltage rating: 250v ac current rating: 0.5a operating temp. range: C20 c to +60 c materials and finish contact: pb / ni-au insulator base: pps (glass flled) black features ? realizing smooth extraction of smartmedia by ejection function ? stand-off types are available to mount components under the body of cn015 ? adapting sequential method to secure data protection by contacting in the order of ground-power-signal correctly series no. rz = 3.3v for smartmedia card (3.3v) type 20 pcb mounting: 3 = smt fixing metal pads height of stand-off: ***) 0 = a(0.00mm), b(4.80mm), c(2.80mm) special notice for operation: never soak and wash after soldering. there are cases wheresmartmedia can not be smoothly inserted because of fux remaining inside of the connector, after washing. wash only part of the connector terminal on pc board. function table series cn015 - type 20 direct mounting, smt fixing (with ejector) part number (details) recommended pcb layout type 20 with smt metal pads (3.3v) top view ***) dimensions a, b and c are shown in drawings below.
|